Tile glue adopts advanced production technology from Germany, and is compounded with new high-molecular nano-polymers and high-grade pigments. The two-component colloid is fully mixed and reacted in the mixing tube by extrusion with a glue gun, and the appearance is rich and colorful after final curing and molding.
Features:
1. Using the latest production technology, new materials, double effect in one, anti-dew, waterproof, anti-black, heat-resistant, anti-freeze, stain-resistant, acid-alkali-resistant. Smooth as porcelain.
2. Each one uses high-grade pigments, the color is noble and bright, with fashion elements, combined with home fashion, to create an elegant, luxurious and rich living environment.
3. Glue gun construction, convenient and fast, one-time molding, no flow, no collapse, green and environmental protection, non-toxic and harmless.
Scope of application:
1. Beautiful joints and joints of various ceramic tiles, glass bricks, quartz bricks, ceramic tiles and other ceramic tiles.
2. Ground gaps, floor peak gaps, wall edge banding and beautiful seams such as kitchen countertops, bathrooms, toilet window sills and balconies.
Construction method :
1. Clean the gap and make sure the surface of the gap is smooth and free of sewage and dust.
2. Paste masking paper or tape on the edge of the seam, and then apply real porcelain glue.
3. Use a labor-saving glue gun for construction, and first punch out 30cm of real porcelain glue and discard it to ensure that the real porcelain glue is mixed evenly.
4. The diameter of the glue outlet should be smaller than the width of the seam barrier, rather less than too much so as not to overflow the real porcelain glue.
5. Use a spatula or a round stick to scrape off the porcelain after drilling, straighten the glue strip, and remove the masking paper or tape before the glue is dry. If there is any overflow, wipe it with alcohol or shovel it off with a spatula after the glue is cured.
6. After standing for 3-5 hours, it is initially cured, and it will be completely cured the next day, as smooth as porcelain
Note:
1. During the construction process, if the glue is not applied continuously for more than 20 minutes, the glue in the mixing tube will gradually solidify. If it is difficult or impossible to pump out, a new mixing tube needs to be replaced.
2. For the unused glue in the hose, unscrew the mixing tube first, wipe off the overflowing glue from the hose head, then tighten the rubber cap and store it, and replace it with a new mixing nozzle when it is used next time.
3. Avoid long-term skin contact with incompletely cured real porcelain glue, and keep out of reach of children.
Executive standard: GB18583-2008
Storage: Storage temperature below 25"C, shelf life 12 months
