Silicone Structural Sealant (door and window installation system)
September 01 , 2023
Views: 603
Even the purpose
It is suitable for bonding and sealing of high-end system door and window projects. It is suitable for bonding and sealing of aluminum watch boards, glass, ceramics and marble tiles. Various other construction and industrial uses.
construction guide
Use solvents such as toluene or acetone to clean the interface and keep it dry. If it is necessary to use a primer together to enhance its adhesion, it can be applied after the primer is dry. During construction, sealant should be applied to completely fill the joints to ensure that both sides are bonded. Apply tape to the area that needs to be protected, but do not let the tape touch the surface to be constructed. Trim the edges immediately before the glue cures to achieve a polished finish.
Use restrictions:
Not for structural bonding. It is not suitable for all materials that will leak grease, extenders or solvents. It is not suitable for airtight places, because the sealant needs to absorb moisture in the air to cure. It is not suitable for use on frosty or wet surfaces, in places with continuous flooding or in places that are humid all year round.
Precautions:
The sealant construction site should pay special attention to maintaining a good ventilation environment; keep it out of the reach of children to avoid accidental ingestion; if the eyes accidentally come into contact with the uncured adhesive, wash it with plenty of water in time and seek help from a doctor.
Storage period: Keep the original sealed state and store in a dry place below 27C. The storage period is 12 months.
Executive standard: GB 16776-2005
